Telephone: +971 4 222 4344           


In store now

Be the first to review this product


Lamatel Brackets are galvanized, made to withstand the harshest environments and are easily mountable. The LT-C/ANT-BU is a Pipe-to-pipe clamp kit which allow the parallel connection of two similar or dissimilar sized pipes. Typically used to attach stand-off mounts or pipes to tower legs.

Availability: In store now


Clamp kit is composed of the following to complete two brackets:

  • 4 x Clamp Plates
  • 2 x Welded(dual) Clamp
  • 4 x Stainless Steel Threaded Rods
  • 12 x Hex Nuts
  • 8 x Spring Washers

All parts are hot galvanized, coated thickness at no less than 65um


  • Ensure all clamp kit accessories are complete before assembly;
  • Apply the anti-seize lubricant to all threaded rods prior to mounting;
  • Insert the rods through the v-plates with lock washers and hex nuts as per the correct mounting configuration illustration;
  • Mount both clamps on the support structure with 2 single clamp plates with the corresponding lock washers and hex nuts;
  • Observe 1”-2” rod exposure from above and below while arranging the clamps;
  • Antenna edge between the fiber and the metal base should be levelled to the top of the support structure prior to tightening as per the illustration;
  • Ensure to allow sufficient threaded rod length on the antenna side for proper positioning and adjustment; Tighten clamps until lock-washers are flattened, then add ½ turn on each nut.
  • Apply weatherproofing materials (e.g. grease tape, rubber tape, insulator tape) to secure the antenna port connection.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Reviews

You're reviewing: LT-C/ANT-BU

  About Tabbara Electronics

  Sales Terms & Conditions

Privacy Policy