I/O Bus, Digital Inputs, Analog Inputs
6.3 in. / 160mm (H) x 2.95 in. / 75mm (W) X 4.4 in. / 112mm (D)
450 grams (without expansions)
EIA/TIA 603 Base station, Sinusoidal 0.07mm @ 10 to 30 Hz, 0.035 mm @ 30-60 Hz
-400 meters to +4000 meters
5% to 95% RH @ 50 degrees Celcius
negative 40 Degrees celcius to positive 70 degrees celcius (excluding radios)
negative 55 degrees celcius to positive 85 degrees celcius (excluding radios)
Sitara CPU (Cortext-A8)
Linux
FLASH 256 MB (32 MB for user), RAM 256 MB (16 MB for user)
LEDS 4*Main + 1*LAN + RS232 (tx, rx)
Coin Rechargeable Batter (at least 20 days)
On board: 10/100 Mb/sec
Cellular modem, leased line modem, data radio, broadband radio
APX, MOTOTRBO
MDLC over Serial
ModBus (Slave/Master over RS232/RS485 and Ethernet
Main board: RS232 (115.2kbps)/RS485 (460 kbps), Half/Full Duplex with/without CD; Plug-In (Optional): Isolated 2 x RS232 (115.2 kbps)
Digital MOTOTRBO, Digital Trunked Astro, Tetra
LTR Local (via direct connection) and FEP Remote
LTR Local (via direct connection) and FEP Remote
10 ms
Ranges:
0-20mA, 4-20mA, 0-5V; Resolution: 16 Bit; Accuracy: 0.1% of full scale; User-configurable signal smoothing and 50/60 Hz filter
8 x AI Isolated, 0-20mA, 420mA or 0-5VDC, resolution:16bit, Accuracy = .1% of full scale, user configurable smoothing, user configurable
Wet inputs;
Isolated (1500v relative to the CPU) ; De-bouncing filter: 10,20,30,40,50 mSec; Fast counter - 2KHz
12 x Wet DI Isolated, 8 x AI Isolated, Wet inputs, de-bouncing filter 10,20,30,40,50mS, fast counter 2KHz, Isolation to CPU: 1500V
ML form C ( SPDT) relays
Wet inputs; Isolated (1500v relative to the CPU); De-bouncing filter:10,20,30,40,50 mSec; Fast counter - 2KHz
Yes
Yes
Ranges: 0-20mA , 4-20mA, 0-10V; Resolution: 12bit; Accuracy: 0.1% of full scale
8 x DO Relay 2.5a, 4 x ML Form C (SPDT), 4 x EE Form C (SPDT), DO Frequency: 10 Hz
Regulatory Specifications
Safety standards
UL 60950-1, CSA 22.2-60950-1, IEC 60950-1/EN60950, AS/NZS 60950
Emissions
CFR 47 FCC part 15, subpart B (class A) EN55022:2003 Class A, EN61000-3-2, EN61000-3-3
Immunity
IEC 61000-4-2,
IEC 61000-4-3,
IEC 61000-4-4,
IEC 61000-4-5,
IEC 61000-4-6,
IEC 61000-4-8,
IEC 61000-4-11